Katalog




Vi er medlem af brancheportalen Electronic Supply, der er målrettet elektronikbranchen i Danmark.

ELECTRO-DESIGN

Electro Design designer og fremstiller automationsprodukter til elektronikindustrien. Siden den første transportør blev lavet i år 1987 har de leveret cirka 5000 enheder til kunder over hele verden.

Vi har et komplet produktprogram til SMT lines, Conformal Coating lines, Selective and Wave Soldering lines, AOI Inspection Lines/ Cells og specifikke opgaver.
  • Conveyor---T3
    The T3 conveyor is a sectioned conveyor with a rigid framework. Each side and section of the conveyor has its own motor, belt and board-present sensor, enabling a board to be buffered on each section and provide smooth, reliable transportation of PCBs.Length from 500 mm to 2500 mm
  • Conveyor---T4
    The T4 conveyor is a sectioned conveyor with a rigid framework. Each side and section of the conveyor has its own motor, belt and board-present sensor, enabling a board to be buffered on each section and provide smooth, reliable transportation of PCBs
  • Workstation---T3
    The T3 workstation is built around the standard T3 conveyor and enables manual assembly work and inspections to be carried out on PCBs in-line. Each side and section of the conveyor has its own motor and belt, providing smooth and reliable transportation of PCBs
  • Workstation---T4
    The T4 workstation is built around the standard T4 conveyor and enables manual assembly work and inspections to be carried out on PCBs in-line. Each side and section of the conveyor has its own motor and belt, providing smooth and reliable transportation of PCBs
  • Large-Board-Conveyor
    The large board conveyor is based on the standard transport/buffer conveyor with the following main differences: reinforced rail structure, rail suspension, and belt driving mechanism. Each section of the conveyor has its own powerful DC motor that drives the belt on both sides, and provides smooth, reliable transportation of PCBs through an electronics assembly line
  • Light-Conveyor
    The Light Conveyor is a cost effective product, aimed at customers that are interested in endless reliability, very low maintenance and safe transportation of PCBs through an electronics assembly line, without the advanced functions and optional accessories offered by our high-end conveyors
  • Electro Design MB814 Light Loader
    The Loader separates and loads bare or pre-mounted PC-Boards from rasterized magazines, onto a subsequent production line.
  • Electro Design MB815 Light Unloader
    The Unloader unloads the production line and loads bare or pre-mounted PCBoards into rasterized magazines.
  • Board-Inverter
    The Board inverter turns a board upside down to make processing possible on both sides without manual intervention. A board transfer cycle consists of infeed, flip or no-flip, and outfeed. Up to 10 different board transfer cycles can be stored. The machine is bi-directional and can receive and send boards both up- and downstreams.
  • Turn-Unit
    The Turn unit routes boards from 1, 2 or 3 infeed sides, to 1, 2 or 3 outfeed sides. Board infeed/outfeed routing can be fixed, based on board flow, and/or based on priority values set via the control panel. Outfeed routing can also be controlled by external signals such as Good/No Good board or by a barcode reader.
  • Board-Transfer
    The board transfer system is a sophisticated solution for dividing, merging, or rerouting production lines by transferring boards between them. The machine consists of a traverse unit and a board carrying shuttle conveyor.
  • Telescopic-Gate
    The Telescopic gate conveyor is a fully automated pass through conveyor that allows people and vehicles to go through, rather than round a complete line. Since the retracted position of the telescopic conveyor is its idle position there is no need to press any buttons to pass through the line
  • Manual-Gate-Conveyor
    The manual gate conveyor allows people and vehicles to go through, rather than round a complete line. It consists of two conveyor sections, one fixed and one jointed.
  • Automatic-Loader
    The Automatic Loader separates and loads bare or pre-mounted PC-Boards from rasterized magazines, onto a subsequent production line.
  • Automatic-Unloader
    The Unloader unloads the production line and loads bare or pre-mounted PCBoards into rasterized magazines.
  • Electro Design MB806 Single Loader
    The Loader separates and loads bare or pre-mounted PC-Boards from rasterized magazines, onto a subsequent production line.
  • Electro Design MB807 Single Unloader
    The Unloader unloads the production line and loads bare or pre-mounted PCBoards into rasterized magazines.
  • Automatic-Reloader
    The Reloader separates and loads bare or pre-mounted PC-Boards from rasterized magazines, onto a subsequent production line, waits for the board to return, and receives the processed board into its original magazine slot
  • Electro Design MB812 Single Reloader
    The Single reloader separates and loads bare or pre-mounted PC-Boards from rasterized magazines, onto a subsequent production line, waits for the board to return, and receives the processed board into its original magazine slot.
  • Dual-Unloader
    The Dual Unloader consists of a conveyor, mounted on a traversing table, that receives and distributes PCBs, from an upstream machine into one or two magazines, depending on selected work mode. If the pass/fail function is activated, good and bad PCBs will be separated and stored in different magazines
  • In-line-Magazine-buffer
    The Magazine buffer is placed in the line to balance board flow in FIFO or LIFO buffer mode, act as a line splitter in Loader or Unloader mode, or line merger in Pass through mode. The magazine can be removed/exchanged at any time in all work modes
  • Buffer-unit---FIFO-/-LIFO
    The Buffer unit is designed to balance station-capacity differences by offering board escape possibilities in case of failures or slow board flow in the connected systems
  • Destacker
    The Destacker separates a batch of PCBs and transports them one by one to the following machine
  • Electro Design MB810 Mini Buffer
    The Mini buffer consists of a vertical buffer and a 500mm conveyor, and is placed in the line to balance board fl ow in LIFO buffer mode, act as a line splitter in Loader or Unloader mode, or good/bad board separator in Triggered mode. Width adjustment, work mode, and other functions, are all accessed from the hand control unit, which makes the unit easily managed.
  • Electro Design MB813 Fifo Lifo Small
    The Buffer unit is designed to balance station-capacity differences by offering board escape possibilities in case of failures or slow board fl ow in the connected systems.
  • Electro Design MB777 Shuttle conveyor
    The shuttle conveyor works as a link between single lane and dual lane production lines. By transferring boards sideways on a shuttle, one lane is divided into two, or two lanes are merged into one. The machine consists of a traverse unit and a board carrying shuttle conveyor.
  • Electro Design DL Conveyor
    The Dual lane conveyor is a sectioned conveyor with a rigid framework. Each lane, side and section of the conveyor has its own motor, belt and boardpresent sensor, enabling a board to be buffered on each section and provide smooth, reliable transportation of PCBs.
Print Anbefal
   
overlay